Monday 27 March 2017

[www.keralites.net] Guy Makes An Awesome Bottle Cap Bar Top!

 

Guy Makes An Awesome Bottle Cap Bar Top!

Friends and family saved their caps for 5+ years specifically for this project. These are beer caps from domestics, craft import."

"Basically tried to bucket them into ROYGBIV. I have no idea how many, but this took a bit of time."

Basically tried to bucket them into ROYGBIV. I have no idea how many, but this took a bit of time.

"Here is the bar top after assembly. Two large pieces of quality 5/8" plywood form the base. The rails are 1 1/2" poplar, and were notched with a table saw and hand routed. The whole assembly was glued and nailed."

"Painted matte black with several cans of Rustoleum. The finish does not have to be perfect since it will be covered in epoxy."

"This was taken immediately after the bar was put in it's final position. It needs to be as close to perfectly level as possible, otherwise the epoxy resin will "pool" in low spots."

"Let the games begin! The initial concept was to lay out an image comprised of bottle caps, then reality set in and we opted for the much easier gradient effect.

To be fair, this took several attempts because of numerous factors: visually, it wasn't as cool as I wanted it to be. Also, we had a lot of black caps, but few bright blue (for example), so laying them down "evenly" was challenging.

Unfortunately, once the caps are down, attempting to move them results in disaster due to the caps shifting/overlapping each other. So, the process would begin all over again if it wasn't right. At one point we attempted adhering them to the bar top with spray adhesive, but that ended up looking terrible not to mention messy."

Let the games begin! The initial concept was to lay out an image comprised of bottle caps, then reality set in and we opted for the much easier gradient effect. To be fair, this took several attempts because of numerous factors: visually, it wasn't as cool as I wanted it to be. Also, we had a lot of black caps, but few bright blue (for example), so laying them down "evenly" was challenging. Unfortunately, once the caps are down, attempting to move them results in disaster due to the caps shifting/overlapping each other. So, the process would begin all over again if it wasn't right. At one point we attempted adhering them to the bar top with spray adhesive, but that ended up looking terrible not to mention messy. It took a few restarts before we were satisfied with the distribution and overall visual.

"As mentioned before, we did not have an equal number of caps sorted by color. Since we had far more black, we needed a way to utilize them without the overall look becoming unbalanced. It took at least 4 hours and several restarts to get to this point."

"This is what $500 of epoxy resin looks like; it was purchased from aeromarineproducts.com."

"It took ~5 layers to thoroughly cover the caps. The last layer we allowed it to flow over the sides to cover the rails, which made a helluva mess. :) Again, drop cloths are your friend."

"The heat gun is used to pull the bubbles out. There may be a better way, but seems to be the most common found on the web."

"Here you can see how we laid them out allowing the caps to "flow" into each other, rather than having hard color stops."

"You may have noticed from a previous picture that this section was nearly completely filled with black caps. Visually, we felt it would be more interesting dispersing various caps to add pops of color."

"Obviously this is not an exact science. Initially I was being pretty anal about cap alignment, color disbursement etc. In the end, we decided to introduce entropy and New Holland's Dragon's Milk, which I feel was the secret ingredient. :)"


__._,_.___

Posted by: Cool Kis <cooolkis@gmail.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1)

Have you tried the highest rated email app?
With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app on the market. What are you waiting for? Now you can access all your inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email again with 1000GB of free cloud storage.

KERALITES - A moderated eGroup exclusively for Keralites...

To subscribe send a mail to Keralites-subscribe@yahoogroups.com.
Send your posts to Keralites@yahoogroups.com.
Send your suggestions to Keralites-owner@yahoogroups.com.

To unsubscribe send a mail to Keralites-unsubscribe@yahoogroups.com.

Homepage: http://www.keralites.net

.

__,_._,___

No comments:

Post a Comment